3Com 5500-EI PWR - Display Gvrp Status; Gvrp

1-7
GVRP Status : Enabled
GVRP Failed Registrations : 0
GVRP Last Pdu Origin : 0000-0000-0000
GVRP Registration Type : Normal
display gvrp status
Syntax
display gvrp status
View
Any view
Parameters
None
Description
Use the display gvrp status command to display the global GVRP status (enabled or disabled).
Examples
# Display the global GVRP status.
<Sysname> display gvrp status
GVRP is enabled
The above information indicates that GVRP is enabled globally.
gvrp
Syntax
gvrp
undo gvrp
View
System view, Ethernet port view
Parameters
None
Description
Use the gvrp command to enable GVRP globally (in system view) or for a port (in Ethernet port view).
Use the undo gvrp command to disable GVRP globally (in system view) or on a port (in Ethernet port
view).
By default, GVRP is disabled both globally and on ports.
Note that: