3Com 5500-EI PWR - Pim

3-9
View
Any view
Parameters
group-address: Multicast group address. With this argument provided, the command displays the RP
information about the specified multicast group; otherwise, the command displays the RP information
about all multicast groups.
Description
Use the display pim rp-info command to display the RP information of the multicast group.
The output of this command also includes BSR and static RP information.
Examples
# Display the RP information about all multicast groups.
<Sysname> display pim rp-info
PIM-SM RP-SET information:
BSR is: 4.4.4.6
Group/MaskLen: 224.0.0.0/4
RP 4.4.4.6
Version: 2
Priority: 0
Uptime: 00:39:50
Expires: 00:01:40
Table 3-5 display pim rp-info command output description
Field Description
PIM-SM RP-SET information: RP-Set
BSR is: IP address of the BSR
Group/MaskLen Multicast group range served by the RP
RP IP address of the RP
Version PIM version
Priority RP priority
Uptime Length of time for which the RP has existed
Expires Remaining lifetime of the RP
pim
Syntax
pim
undo pim