1-14
Field Description
Number of sent optional TLV
Number of the optional TLVs contained in an
LLDPDU sent through the port
Number of received unknown TLV
Number of the unknown TLVs contained in a received
LLDPDU
display lldp tlv-config
Syntax
display lldp tlv-config [ interface interface-type interface-number ]
View
Any view
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display lldp tlv-config command to display the TLVs that are currently sent through a port.
If no port is specified, this command displays all the TLVs that are currently sent through all the ports.
Examples
# Display all the TLVs that are currently sent through all the ports.
<Sysname> display lldp tlv-config
LLDP tlv-config of port 1 [Ethernet1/0/1] :
NAME STATUS DEFAULT
Basic optional TLV :
Port Description TLV YES YES
System Name TLV YES YES
System Description TLV YES YES
System Capabilities TLV YES YES
Management Address TLV YES YES
IEEE 802.1 extend TLV :
Port VLAN ID TLV YES YES
Port And Protocol VLAN ID TLV YES YES
VLAN Name TLV YES YES
IEEE 802.3 extend TLV :
MAC-Physic TLV YES YES
Power via MDI TLV YES YES
Link Aggregation TLV YES YES
Maximum Frame Size TLV YES YES
LLDP-MED extend TLV :
To Next Page
Loading...
