3Com 5500-EI PWR - Cluster; Cluster Enable

1-18
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] cluster
[Sysname-cluster] build aaa
There is no base topology, if set up from local flash file?(Y/N)
n
#Apr 3 08:15:03:166 2000 aaa_0. 3Com CLST/5/Cluster_Trap:- 1 -
OID:1.3.6.1.4.1.2011.6.7.1.0.3(hgmpMemberStatusChange):member 00.00.00.00.00.12.
a9.90.22.40 role change, NTDPIndex:0.00.00.00.00.00.12.a9.90.22.40, Role:1
[aaa_0.Sysname-cluster]
cluster
Syntax
cluster
View
System view
Parameters
None
Description
Use the cluster command to enter cluster view.
Examples
# Enter cluster view.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] cluster
[Sysname-cluster]
cluster enable
Syntax
cluster enable
undo cluster enable
View
System view
Parameters
None
Description
Use the cluster enable command to enable the cluster function.