3-5
Field Description
Local host is BSR The local device serves as the BSR.
display pim interface
Syntax
display pim interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display pim interface command to display the PIM configuration information.
With an interface specified, the command displays the PIM configuration information on the specified
interface; otherwise, the command displays the PIM configuration information on all interfaces.
Examples
# Display the PIM configuration information on all interfaces.
<Sysname> display pim interface
PIM information of VLAN-interface 2:
IP address of the interface is 10.10.1.20
PIM is enabled
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
PIM neighbor limit is 128
PIM neighbor policy is none
Total 1 PIM neighbor on interface
PIM DR(designated router) is 10.10.1.20
Table 3-2 display pim interface command output description
Field Description
IP address of the interface IP address of the VLAN interface
PIM version PIM version running on the interface
PIM mode
PIM mode enabled on the VLAN interface (DM or
SM)
PIM query interval Hello interval
PIM neighbor limit
Limit on the number of PIM neighbors on the
VLAN interface. No neighbor can be added when
the limit is reached
To Next Page
Loading...
