1-12
Field Description
The number of LLDP frames transmitted
Total number of the
LLDP frames transmitted through
the port
The number of LLDP frames received
Total number of the
LLDP frames received through the
port
The number of LLDP frames discarded Total number of the LLDP frames dropped on the port
The number of LLDP error frames
Total number of the
LLDP error frames received through
the port
The number of TLVs discarded Total number of the LLDP TLVs dropped on the port
The number of TLVs unrecognized
Total number of the
LLDP TLVs that cannot be
recognized on the port
The number of neighbor information aged
out
Number of the LLDP neighbor information entries that
have aged out on the port
The number of CDP frames transmitted Total number of the CDP frames transmitted on the port
The number of CDP frames received Total number of the CDP frames received on the port
The number of CDP frames discarded Total number of the CDP frames dropped on the port
The number of CDP error frames
Total number of the
CDP error frames received on the
port
display lldp status
Syntax
display lldp status [ interface interface-type interface-number ]
View
Any view
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display lldp status command to display the LLDP status of a port.
If no port is specified, this command displays the LLDP status of all the ports.
Examples
# Display the LLDP status of all the ports.
<Sysname> display lldp status
Global status of LLDP: Enable
The current number of LLDP neighbors: 0
The current number of CDP neighbors: 0
LLDP neighbor information last changed time : 0 days, 0 hours, 4 minutes, 40 seconds
Transmit interval : 30s
Hold multiplier : 4
Reinit delay : 2s
To Next Page
Loading...
