1-4
password-control aging
Syntax
password-control aging aging-time
undo password-control aging
View
System view/local user view
Parameter
aging-time: Password aging time in days. The effective range is 1 to 365.
Description
Use the password-control aging command to configure the password aging time.
Use the undo password-control aging command to restore the default.
By default, the password aging time is 90 days.
Note that:
z The settings in system view have global significance, while those in local user view only have local
significance.
z If both global and local settings are available, the local settings take effect.
Example
# Set the global password aging time to 100 days.
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname] password-control aging 100
# Set the password aging time for a local user “test” to 80 days.
[Sysname] local-user test
[Sysname-luser-test] password-control aging 80
password-control length
Syntax
password-control length length
undo password-control length
View
System view/local user view
Parameter
length: Minimum password length. The effective range is 4 to 32.
Description
Use the password-control length command to configure the minimum password length.
Use the undo password-control length command to restore the default setting.
To Next Page
Loading...
