1-40
display cluster base-members
Syntax
display cluster base-members
View
Any view
Parameters
None
Description
Use the display cluster base-members command to display the information about all the devices in
the base cluster topology, such as member number, name, MAC address, and the current status of
each device in a cluster.
Examples
# Display the information about all the devices in the base cluster topology.
<aaa_0.Sysname> display cluster base-members
SN Device MAC Adress Status
0 aaa_0.Sysname 000f-e200-30a0 UP
1 aaa_1.5500-EI 000f-e200-86e4 UP
Table 1-10 Description on the fields of display cluster base-members
Field Description
SN Device number in the cluster
Device Device name
MAC Address Device MAC address
Status
Device status
Up: The member is connected.
Down: The member is disconnected.
display cluster base-topology
Syntax
display cluster base-topology [ mac-address mac-address | member member-id ]
View
Any view
Parameters
mac-address mac-address: Displays the structure of the standard topology three layers above or
below the node specified by the MAC address.
To Next Page
Loading...
