3-6
Field Description
PIM neighbor policy
Filtering policy of the PIM neighbors on the
current interface
Total 1 PIM neighbor on interface
Totally, one PIM neighbor is present on this
VLAN interface.
PIM DR Designated router
display pim neighbor
Syntax
display pim neighbor [ interface interface-type interface-number ]
View
Any view
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display pim neighbor command to display the PIM neighbor information.
With an interface specified, the command displays the PIM neighbor information on the specified
interface; otherwise, the command displays the PIM neighbor information on all interfaces.
Examples
# Display the PIM neighbor information on all interfaces.
<Sysname> display pim neighbor
Neighbor Address Interface Name Uptime Expires
8.8.8.6 VLAN-interface10 1637 89
8.8.7.6 VLAN-interface11 1636 88
Table 3-3 display pim neighbor command output description
Field Description
Neighbor Address Neighbor address
Interface Name
VLAN interface on which the neighbor has been
discovered
Uptime
Time elapsed since the multicast group was
discovered
Expires Remaining lifetime of the PIM neighbor
To Next Page
Loading...
