3Com 5500-EI PWR - Reset Vrrp Statistics

1-4
Invalid Auth Type : 0 Auth Type Mismatch : 0
Packet Length Errors : 0 Address List Errors : 0
Become Master : 1 Priority Zero Pkts Rcvd : 0
Advertise Rcvd : 0 Priority Zero Pkts Sent : 0
Invalid Type Pkts Rcvd : 0
Table 1-3 Description on the fields of the display vrrp statistics command
Field Description
Interface Interface where the VRRP group resides
VRID VRRP group ID
CheckSum Errors Number of checksum errors
Version Errors Number of version errors
VRID Errors Number of virtual router ID errors
Advertisement Interval Errors
Number of errors of the interval for sending VRRP
advertisements
IP TTL Errors Number of TTL errors
Auth Failures Number of authentication errors
Invalid Auth Type Number of invalid authentication types
Auth Type Mismatch Number of mismatched authentication types
Packet Length Errors Number of VRRP packet length errors
Address List Errors Number of the virtual IP address list errors
Become Master
Number of the occasions where the current switch operates
as the master
Priority Zero Pkts Rcvd
Number of the received VRRP advertisements with the
priority of 0
Advertise Rcvd Number of the received VRRP advertisements
Priority Zero Pkts Sent Number of the sent advertisements with the priority of 0
Invalid Type Pkts Rcvd Number of the packet type errors
reset vrrp statistics
Syntax
reset vrrp statistics [ interface vlan-interface vlan-id [ vrid virtual-router-id ] ]
View
User view
Parameters
vlan-interface vlan-id: Specifies a VLAN interface by its ID. vlan-id is the ID of a VLAN interface.
vrid virtual-router-id: Specifies a VRRP group. virtual-router-id is the VRRP group ID, ranging from 1 to
255.