3Com 5500-EI PWR - 3 HABP Configuration Commands; Display Habp

3-1
3 HABP Configuration Commands
HABP Configuration Commands
display habp
Syntax
display habp
View
Any view
Parameters
None
Description
Use the display habp command to display HABP configuration and status.
Examples
# Display HABP configuration and status.
<Sysname> display habp
Global HABP information:
HABP Mode: Server
Sending HABP request packets every 20 seconds
Bypass VLAN: 2
Table 3-1 Description on the fields of the display habp command
Field Description
HABP Mode
Indicates the HABP mode of the switch. A switch
can operate as an HABP server (displayed as
Server) or an HABP client (displayed as Client).
Sending HABP request packets every 20
seconds
The HABP request packet transmission interval
is 20 seconds.
Bypass VLAN
Indicates the IDs of the VLANs to which HABP
request packets are sent.