3Com 5500-EI PWR - Display Fib; IP Performance Configuration Commands

2-1
2 IP Performance Optimization Configuration
Commands
IP Performance Configuration Commands
display fib
Syntax
display fib
View
Any view
Parameters
None
Description
Use the display fib command to display all forwarding information base (FIB) information.
Examples
# Display all FIB information.
<Sysname> display fib
Flag:
U:Usable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
R:Reject E:Equal cost multi-path L:Generated by ARP or ESIS Destination/Mask Nexthop
Flag TimeStamp Interface
10.153.17.0/24 10.153.17.99 U t[37] Vlan-interface1
10.153.18.88/32 127.0.0.1 GHU t[37] InLoopBack0
10.153.18.0/24 10.153.18.88 U t[37] LoopBack0
10.153.17.99/32 127.0.0.1 GHU t[37] InLoopBack0
127.0.0.0/8 127.0.0.1 U t[33] InLoopBack0