3Com 5500-EI PWR - Display Ospf Asbr-Summary

4-9
Field Description
Nexthop IP address of the next hop
Interface Local output interface
display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address mask ]
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
ip-address: Matched IP address, in dotted decimal notation.
mask: Subnet mask, in dotted decimal notation.
Description
Use the display ospf asbr-summary command to display the summary information of OSPF
redistributed routes.
If you do not specify an IP address or subnet mask, the summary information of all OSPF redistributed
routes will be displayed.
Related commands: asbr-summary.
Examples
# Display the summary information of all OSPF redistributed routes.
<Sysname> display ospf asbr-summary
OSPF Process 1 with Router ID 1.1.1.1
Summary Addresses
Total summary address count: 2
Summary Address
net : 168.10.0.0
mask : 255.254.0.0
tag : 1
status : Advertise
The Count of Route is 0
Summary Address
net : 1.1.0.0
mask : 255.255.0.0
tag : 100
status : DoNotAdvertise