3Com 5500-EI PWR - 1 Smart Link Configuration Commands; Display Smart-Link Flush

1-1
1 Smart Link Configuration Commands
Smart Link Configuration Commands
display smart-link flush
Syntax
display smart-link flush
View
Any view
Parameters
None
Description
Use the display smart-link flush command to view the information about how the Smart Link device
processes flush messages.
Examples
# Display the information about how the Smart Link device processes flush messages.
<Sysname> display smart-link flush
Flush interface :Ethernet1/0/1
Count of flush packets received : 1
Time of last flush packet received : 22:52:23 2006/04/01
Source MAC of last flush packet received : 000f-e20f-5566
Device ID of last flush packet received : 000f-e20f-5566
Control VLAN ID of last flush packet received : 1
Table 1-1 Description on the fields of the display smart-link flush command
Field Description
Flush interface Interface that receives the latest legal flush message
Count of flush packets received Total number of flush messages received
Time of last flush packet received Time when the last legal flush message is received
Source MAC of last flush packet received
Source MAC address in the last legal flush message
received
Device ID of last flush packet received
Bridge MAC address of the device from which the last
legal flush message was received
Control VLAN ID of last flush packet
received
Control VLAN ID in the last legal flush message
received