1-45
Field Description
Peer Port ID
Name of the port on the peer device connecting to the local
device
Native Port ID
Name of the port on the local device connecting to the peer
device
Speed Rate of the local port connecting to the peer device
Duplex Duplex mode of the local port connecting to the peer device
topology accept
Syntax
topology accept { all [ save-to local-flash ] | mac-address mac-address | member-id member-id |
administrator }
View
Cluster view
Parameters
all: Accepts the current cluster topology as the standard topology.
save-to: Saves the standard topology of the current cluster to the local Flash or the cluster FTP server.
local-flash: Saves the standard topology of the current cluster to the local Flash.
mac-address mac-address: Accepts adding the device with the specified MAC address to the standard
topology of the cluster.
member-id member-id: Accepts adding the device with the specified member ID to the standard
topology of the cluster.
administrator: Accepts adding the administrative device to the standard topology of the cluster.
Description
Use the topology accept command to accept the topology of the current cluster as the standard
topology, and save the standard topology to the Flash memory of the administrative device so that the
standard topology can be restored when errors occur to the topology.
z You can only use this command on the cluster management device.
z If the management device is a slave device in an XRN fabric, the standard topology information is
saved only to the Flash of the master device in the XRN fabric.
Related commands: display cluster base-topology, topology restore-from, topology save-to.
To Next Page
Loading...
