3Com 5500-EI PWR - Interface; Jumboframe Enable

1-20
Giant frames refer to VLAN untagged frames of more than 1518 bytes and VLAN tagged frames of
more than 1522 bytes.
Examples
# Enable the giant-frame statistics function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] giant-frame statistics enable
interface
Syntax
interface interface-type interface-number
View
System view
Parameters
interface-type: Port type, which can be Aux, Ethernet, GigabitEthernet, LoopBack, NULL or
VLAN-interface.
interface-number: Port number, in the format of Unit ID/slot number/port number, where:
Unit ID is in the range of 1 to 8;
The slot number is 0 if the port is an Ethernet port, the slot number is 1 if the port is a GigabitEthernet
port.
The port number is relevant to the device.
Description
Use the interface command to enter specific port view. To configure an Ethernet port, you need to enter
Ethernet port view first.
Examples
# Enter Ethernet 1/0/1 port view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1]
jumboframe enable
Syntax
jumboframe enable