3Com 5500-EI PWR - Display System-Guard Tcn State; System-Guard Ip Detect-Maxnum

4-3
Parameters
None
Description
Use the display system-guard l3err state command to view the status of Layer 3 error control.
Examples
# View the status of Layer 3 error control.
<Sysname> display system-guard l3err state
System-guard l3err status: enabled
display system-guard tcn state
Syntax
display system-guard tcn state
View
Any view
Parameters
None
Description
Use the display system-guard tcn state command to view the status of TCN.
Examples
# View the status of TCN System Guard.
<Sysname> display system-guard tcn state
System-guard TCN state: enabled
system-guard ip detect-maxnum
Syntax
system-guard ip detect-maxnum number
undo system-guard ip detect-maxnum
View
System view
Parameters
number: Maximum number of hosts that can be monitored, in the range of 1 to 100.
Description
Use the system-guard ip detect-maxnum command to set the maximum number of infected hosts
that can be monitored currently.