3Com 5500-EI PWR - Display Password-Control; Password Control Configuration Commands

1-1
1 Password Control Configuration Commands
Password Control Configuration Commands
display password-control
Syntax
display password-control
View
Any view
Parameter
None
Description
Use the display password-control command to display the information about the global password
control for all users.
Example
# Display the information about the current password control for all users.
<Sysname]> display password-control
Global password settings for all users:
Password aging: Enabled(90 days)
Password length: Enabled(10 Characters)
Password composition: Enabled(1 type(s), 1 character(s) per type)
Password history: Enabled(Max history record:4)
Password alert before expire: 7 days
Password authentication-timeout:60 seconds
Password attempt times: 3 times
Password attempt-failed action: Lock for 120 minutes
The following table describes the output fields of the display password-control command.
Table 1-1 Description on the fields of the display password-control command
Field Description
Password aging Password aging time
Password length Minimum password length
Password composition Password composition policy
Password history History password recording
Password alert before expire Alert time before password expiration
Password authentication-timeout Timeout time for password authentication