3Com 5500-EI PWR - Topology Restore-From

1-46
Examples
# Save the current cluster topology as the base topology and save it in the local flash.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] topology accept all save-to local-flash
# Accept the device with the MAC address 0010-0f66-3022 as a member of the base cluster topology.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] topology accept mac-address 0010-0f66-3022
topology restore-from
Syntax
topology restore-from local-flash
View
Cluster view
Parameters
local-flash: Restores the standard topology of the cluster from the local Flash memory.
Description
Use the topology restore-from command to restore the standard topology of the cluster from the Flash
memory of the administrative device when errors occur to the topology, and advertise the topology to
the member devices of the cluster to ensure normal operation of the cluster.
You can only use this command on the cluster administrative device.
Related commands: topology accept, topology save-to.
Examples
# Restore the base cluster topology from the flash of the management device in the cluster.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] topology restore-from local-flash