4-21
Table 4-8 Description on the fields of the display ospf lsdb ase command
Field Description
type Type of the LSA
ls id Link state ID of the LSA
adv rtr Router ID of the router that advertises the LSA
ls age Age of the LSA
len Length of the LSA
seq# Sequence number of the LSA
chksum Checksum of the LSA
Options
Options of the LSA:
z O: Opaque LSA advertisement and reception
capability
z E: AS External LSA reception capability
z EA: External extended LSA reception and
forwarding capability
z DC: On-demand link support
z N: NSSA external LSA support
z P: Capability of an NSSA ABR to translate
Type-7 LSAs into Type-5 LSAs.
Net mask Network mask
E type
Type of external route:
z 1: Type-1 external route
z 2: Type-2 external route
Forwarding Address Forwarding address
Tag Tag
display ospf nexthop
Syntax
display ospf [ process-id ] nexthop
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
Description
Use the display ospf nexthop command to display the OSPF next-hop information.
Examples
# Display the OSPF next-hop information.
<Sysname> display ospf nexthop
To Next Page
Loading...
