3Com 5500-EI PWR - Display Mpm Forwarding-Table

1-2
Field Description
STATE
State of the MAC address, which includes only
Config static, indicating that the table entry is
manually added.
PORT INDEX
Ports out which the multicast packets destined
for the multicast MAC address are forwarded
AGING TIME(s)
State of the aging timer. The aging timer for
static multicast MAC addresses has only one
state: NOAGED, indicating that the entry never
expires.
display mpm forwarding-table
Syntax
display mpm forwarding-table [ group-address ]
View
Any view
Parameters
group-address: IP address of a multicast group, in the range 224.0.0.0 to 239.255.255.255. With this
argument configured, this command displays only those forwarding entries that match the specified
multicast address; otherwise, the command displays all the forwarding entries.
Description
Use the display mpm forwarding-table command to display the information of multicast forwarding
entries containing port information, where mpm stands for multicast port management.
This command displays the incoming interface, outgoing interface and outgoing port information for
specific multicast streams, thus facilitating port management.
Related commands: display multicast forwarding-table.
Examples
# Display the information about all the multicast forwarding entries containing port information.
<Sysname> display mpm forwarding-table
Total 1 entry(entries)
00001. (120.0.0.2, 225.0.0.2)
iif Vlan-interface1200
1 oif(s):
Vlan-interface32
Ethernet1/0/19
Total 1 entry(entries) Listed