1-10
# Display the test results of the test group with administrator name administrator, and operation tag
Jitter.
<Sysname> display remote-ping results administrator Jitter
remote-ping entry(admin administrator, tag Jitter) test result:
Destination ip address:10.2.2.2
Send operation times: 100 Receive response times: 100
Min/Max/Average Round Trip Time: 9/21/13
Square-Sum of Round Trip Time: 18623
Last succeeded test time: 2000-4-2 8:14:58.2
Extend result:
SD Maximal delay: 10 DS Maximal delay: 10
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
Jitter result:
RTT Number:100
Min Positive SD:1 Min Positive DS:1
Max Positive SD:6 Max Positive DS:8
Positive SD Number:38 Positive DS Number:25
Positive SD Sum:85 Positive DS Sum:42
Positive SD average:2 Positive DS average:1
Positive SD Square Sum:267 Positive DS Square Sum:162
Min Negative SD:1 Min Negative DS:1
Max Negative SD:6 Max Negative DS:8
Negative SD Number:30 Negative DS Number:24
Negative SD Sum:64 Negative DS Sum: 41
Negative SD average:2 Negative DS average:1
Negative SD Square Sum:200 Negative DS Square Sum:161
SD lost packets number:0 DS lost packet number:0
Unkown result lost packet number:0
Table 1-5 Description on the fields of the display remote-ping result command
Field Description
RTT Number Number of received response packets
Min Positive SD
Minimum positive jitter delay from the source to
the destination
Min Positive DS
Minimum positive jitter delay from the destination
to the source
Max Positive SD
Maximum positive jitter delay from the source to
the destination
Max Positive DS
Maximum positive jitter delay from the
destination to the source
Positive SD Number
Number of positive jitter delays from the source
to the destination
To Next Page
Loading...
