4-3
Examples
# Display the detailed information of MSDP peer 10.110.11.11.
<Sysname> display msdp peer-status 10.110.11.11
MSDP Peer 20.20.20.20, AS 100
Description:
Information about connection status:
State: Up
Up/down time: 14:41:08
Resets: 0
Connection interface: LoopBack0 (20.20.20.30)
Number of sent/received messages: 867/947
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Table 4-2 display msdp peer-status command output description
Field Description
MSDP Peer MSDP peer address
AS
Number of the AS where the MSDP peer is
located. “?” indicates that the system was unable
to obtain the AS number
State
MSDP peer status:
z Up: Session set up; MSDP peer in session
z Listen: Session set up; local device as server,
in listening state
z Connect: Session not set up; local device as
client, in connecting state
z Shutdown: Deactivated
z Down: Connection failed
Resets
Number of times the MSDP peer connection is
reset
Up/Down time
Time passed since MSDP peer connection
establishment/failure
To Next Page
Loading...
