1-14
The configuration file must use .cfg as its extension name and the startup configuration file must be
saved at the root directory in the Flash of the switch.
Related commands: display startup.
Examples
# Configure the configuration file named config.cfg as the main configuration file to be used for the next
startup of the current switch, which is not in any fabric.
<Sysname> startup saved-configuration config.cfg main
Please wait......Done!
# When a fabric is formed, configure the configuration file named 123.cfg as the backup configuration
file to be used for the next startup of unit 1 in the fabric.
<Sysname> startup saved-configuration unit1>flash:/123.cfg backup
Please wait......Done!
To Next Page
Loading...
