1-2
Server response timeout value is 100s
Guest VLAN re-authenticate period is 30s
Max allowed user number is 1024
Current user number amounts to 1
Current domain: not configured, use default domain
Silent Mac User info:
MAC ADDR From Port Port Index
--- On unit 1, 1 silent mac address(es) found. ---
0016-e0be-e201 Ethernet1/0/2 1(vlan:1)
--- 1 silent mac address(es) found. ---
Ethernet1/0/1 is link-up
MAC address authentication is Enabled
max-auth-num is 256
Guest VLAN is 2
Authenticate success: 1, failed: 0
Current online user number is 1
MAC ADDR Authenticate state AuthIndex
000d-88f8-4e71 MAC_AUTHENTICATOR_SUCCESS 0
……(The following is omitted)
Table 1-1 Description on the fields of the display mac-authentication command
Field Description
Mac address authentication is Enabled MAC address authentication is enabled.
Authentication mode
Username type used in the MAC address
authentication:
z UsernameFixed: Uses the fixed username for
authentication.
z UsernameAsMacAddress: Uses the MAC
address of a user as the username for
authentication.
The default is the MAC address
(UsernameAsMacAddress).
Fixed password
Meaning of this field varies by the username type
for MAC address authentication:
z If the username type is MAC address, this
field indicates whether to use a fixed
password for authentication. By default, this
field is not configured, which means using the
MAC address of a user as the password for
authentication.
z If the username type is fixed username, this
field indicates whether a fixed password is
configured. By default, this field is not
configured, which means the password is
null.
Fixed password
Password used in the fixed mode, which is not
configured by default.
Offline detect period
Offline detect timer, which sets the time interval
to check whether a user goes offline and defaults
to 300 seconds.
To Next Page
Loading...
