3-3
View
VLAN interface view
Parameters
None
Description
Use the local-proxy-arp enable command to enable local proxy ARP on the VLAN interface.
Use the undo local-proxy-arp enable command to disable local proxy ARP on the VLAN interface.
By default, local proxy ARP is disabled on the VLAN interfaces of a switch.
Examples
# Enable local proxy ARP on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] local-proxy-arp enable
To Next Page
Loading...
