3Com 5500-EI PWR - Page 815

1-2
type: remote-source
status: active
mirroring port:
Ethernet1/0/1 inbound
reflector port: Ethernet1/0/2
remote-probe vlan: 10
# Display the configurations of a remote destination mirroring group on your Switch
5500-EI.
<Sysname> display mirroring-group 3
mirroring-group 3:
type: remote-destination
status: active
monitor port: Ethernet1/0/3
remote-probe vlan: 20
Table 1-1 Description on the fields of the display mirroring-group command
Field Description
mirroring-group Port mirroring group number.
type
Port mirroring group type, which can be
local, remote-source, or
remote-destination.
status
Status of the port mirroring group, which
can be active or inactive.
mirroring port
Source port in port mirroring. This field is
available only for local mirroring groups or
remote source mirroring groups.
both/inbound/outbound
The direction of the mirrored packets,
which can be one of the following:
z both: means packets received on and
sent from the mirroring port are
mirrored.
z Inbound: means packets received on
the mirroring port are mirrored.
z outbound: means packets sent from the
mirroring port are mirrored.
monitor port
Destination port. This field is available only
for local mirroring groups and remote
destination mirroring groups.
reflector port
Reflector port. This field is available only
for remote source mirroring groups.
remote-probe vlan
Remote probe VLAN. This field is available
only for remote source/destination
mirroring groups.