3Com 5500-EI PWR - Page 887

1-25
candidate switches to be automatically added into the cluster, you can set the topology collection
interval to zero (by using the ntdp timer command), which specifies not to perform topology collection
periodically.
Examples
# Display information about all candidate devices.
<aaa_0.Sysname-cluster> display cluster candidates
MAC HOP IP PLATFORM
3900-0000-3334 2 16.1.1.11/24 5500-EI
000f-e20f-3190 1 16.1.1.1/24 5500-EI
Table 1-6 Description on the fields of the display cluster candidates command
Field Description
MAC MAC address of the candidate device
Hop
Hops from the management device to the
candidate device
IP IP address of the candidate device
Platform Platform of the candidate device
# Display information about a specified candidate device.
<aaa_0.Sysname-cluster> display cluster candidates mac-address 000f-e20f-3190
Hostname : 5500-EI-3
MAC : 000f-e20f-3190
Hop : 1
Platform : 5500-EI
IP : 16.1.1.1/24
# Display detailed information about all candidate devices.
<aaa_0.Sysname-cluster> display cluster candidates verbose
Hostname : 5500-EI
MAC : 000f-e200-3334
Hop : 2
Platform : 5500-EI
IP : 16.1.1.11/24
Hostname : 5500-3
MAC : 000f-e20f-3190
Hop : 1
Platform : 5500-EI
IP : 16.1.1.1/24