3Com 5500-EI PWR - Page 988

1-12
Description
Use the public-key local create command to create a local DSA key pair or RSA key pairs.
Note that:
z Generating the RSA and DSA key pairs on the server is prerequisite to SSH login.
z After entering this command, you will be prompted to provide the length of the key modulus. The
length is in the range 512 to 2048 bits and defaults to 1024 bits. If the key pair already exists, the
system will ask you whether you want to overwrite it.
z The key pair created by this command can survive a reboot. You only need to configure it once.
Related commands: public-key local destroy, display public-key local.
Examples
# Create local RSA key pairs.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Input the bits in the modulus[default = 1024]:
Generating keys...
...++++++
...................................................................++++++
...........................++++++++
.....++++++++
......
# Display the public key information of the local RSA key pairs.
[Sysname] display public-key local rsa public
=====================================================
Time of Key pair created: 03:14:23 2000/04/06
Key name: Sysname_Host
Key type: RSA encryption Key
=====================================================
Key code:
305C300D06092A864886F70D0101010500034B003048024100D6665EFEC14F48A5B42A413E2FACCAA9F02C77
2AEDC4911E76AAEE55BA49C4A0233D2D80504068BD9C892C0DD9EBBBC7EB8842ED61CDB418A29CA1362BB48C
190203010001
=====================================================
Time of Key pair created: 03:14:36 2000/04/06
Key name: Sysname_Server
Key type: RSA encryption Key
=====================================================
Key code: