ABB IRB 1660 - Robot Cable, Power, for Robots with Foundry and Wash Protection; Robot Cable, Signals; Bending Radius for Static Floor Cables

Robot cable, power, for robots with foundry and wash protection
Art. no.Cable (foundry)
3HAC9038-1Robot cable, power: 7 m
3HAC9038-2Robot cable, power: 15 m
3HAC9038-3Robot cable, power: 22 m
3HAC9038-4Robot cable, power: 30 m
Robot cable, signals
Art. no.Cable
3HAC2493-1Robot cable signal, shielded: 7 m
3HAC2530-1Robot cable signal, shielded: 15 m
3HAC2540-1Robot cable signal, shielded: 22 m
3HAC2566-1Robot cable signal, shielded: 30 m
Bending radius for static floor cables
The minimum bending radius is 10 times the cable diameter for static floor cables.
A
B
xx1600002016
DiameterA
Diameter x10B
Continues on next page
120 Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
© Copyright 2006-2018 ABB. All rights reserved.
2 Installation and commissioning
2.5.2 Robot cabling and connection points
Continued