ABB IRB 1660 - Design until June 2006; Design after June 2006, Type a

Note
Note! When mounting heavier equipment, for example wire feeders in holes (A),
the bracket must be supported in the opposite holes (D).
Design until June 2006
xx1500003259
View from EA
2xM5 depth 7.5, mounting holes for equipmentB
Design after June 2006, type A
xx1500003260
View from EA
2xM6 depth 10, mounting holes for equipmentB
Continues on next page
Product manual - IRB 1600/1660 85
3HAC026660-001 Revision: W
© Copyright 2006-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.7 Fitting equipment on the robot (robot dimensions)
Continued