ABB IRB 1660 - Connectors that Meet Military Standard; Connector for Crimping; Connector for Soldering

Connectors that meet Military standard
The connectors specified below meet Millitary standard MIL-C-26482 series 1 and
can be used for connection to R2.CS and R2.CP (only for standard customer
connection).
The figure below shows a complete connector, including pin connector and
backshell.
xx0400001340
Connector for crimping
The complete pin connectors for crimping include pin connector and backshell.
Military standard MIL-C-26482Connector for crimping
MS3126*1626SComplete pin connector, CS
MS3126*1210SComplete pin connector, CP
M39029/31-240Turned pin 0.2 - 0.5 mm
2
M29029/31-228Turned pin 0.5 - 1.5 mm
2
Connector for soldering
The complete pin connectors for soldering include pin connector, backshell and
pins.
Military standard MIL-C-26482Connector for soldering
MS3116*1626SComplete pin connector, CS
MS3116*1210SComplete pin connector, CP
Product manual - IRB 1600/1660 125
3HAC026660-001 Revision: W
© Copyright 2006-2018 ABB. All rights reserved.
2 Installation and commissioning
2.5.3 Customer connections on the robot
Continued