ABB IRB 1660 - Page 136

Required equipment
NoteSpare part numberEquipment
See Spare part lists on
page 387.
Labels
Inspecting labels
Use this procedure to inspect the labels on the robot.
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot work-
ing area.
1
See the figure in Location of information
labels on page 135.
Check all labels.2
Replace any missing or damaged labels.3
136 Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
© Copyright 2006-2018 ABB. All rights reserved.
3 Maintenance
3.3.2 Inspecting information labels
Continued