ABB IRB 1660 - Page 146

RMU 101
7
11
9
8
xx1300000332
Serial measurement board RMU 1017
BU unit8
Battery pack (3-pole battery contact)9
Push button guard10
Required equipment
Note
There are two variants of SMB units and batteries. One with 2-pole battery contact
and one with 3-pole battery contact. The variant with the 3-pole battery contact
has longer lifetime for the battery.
It is important that the SMB unit uses the correct battery. Make sure to order the
correct spare parts. Do not replace the battery contact!
NoteSpare part no.Equipment
See Spare part lists on
page 387.
Serial measurement
board
See Spare part lists on
page 387.
Battery pack
Replace if damaged.3HAC 022047-001Gasket, base cover
Continues on next page
146 Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
© Copyright 2006-2018 ABB. All rights reserved.
3 Maintenance
3.4.4 Replacing the battery pack
Continued