DescriptionAction
xx0900000122
Seal all refitted joints with Sikaflex 521FC.3
xx0900000125
Use the tooling pin to even out the surface
of the Sikaflex seal.
4
Sikaflex 521FC skin dry time (15 minutes).Wait 15 minutes.5
3HAC036639-001Use Touch up paint Clean Room, white to
paint the joint.
Note
Always read the instruction in the product
data sheet in the paint repair kit for Clean
Room.
6
Note
After all repair work, wipe the robot free from particles with spirit on a lint free
cloth.
160 Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
© Copyright 2006-2018 ABB. All rights reserved.
4 Repair
4.2.4 Cut the paint or surface on the robot before replacing parts
Continued
To Next Page
Loading...
