Note/IllustrationAction
Shown in the figure Location of signal
lamp on page 92.
xx0400001263
Fit the cable bracket of the signal lamp to the
two mounting holes in the upper arm housing
(B).
6
• B: Mounting holes, M8 x 12
The signal lamp is now ready for use and is lit
in MOTORS ON mode.
7
94 Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
© Copyright 2006-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.8 Installation of signal lamp for 1600 (option)
Continued
To Next Page
Loading...
