7-12 CELL-DYN 3000 System Operator’s Manual
9140240E — May 1995
Quality Control Chapter 7
The feature enabling the transfer of QC limits and data from a QC file
onto a floppy disk is not currently available. Therefore the following
keys mentioned in this manual should not be used at this time: [LAB ID
SETUP], [LOAD FROM DISK], and [WRITE QC TO DISK].
The [PRINT QC LOG] key is used to print the entire QC log.
The [RETURN] key is used to return to the QC MENU Screen.
WRITE QC
TO DISK
PRINT
QC LOG
RETURN
To Next Page
Loading...
