6240B DC Voltage Current Source/Monitor Operation Manual
1. PREFACE
1-1
1. PREFACE
This chapter describes the accessories, operating environment, precautions, and operating check for person-
nel who operate the 6240B. Read this manual before using the 6240B.
1.1 Product Overview
The 6240B is a DC Voltage Current Source/Monitor that offers high sensitivity with 4
1
/
2
digit source resolu-
tion and 5
1
/
2
digit measurement resolution, as well as various sweep functions and a pulse measurement func-
tion with a minimum pulse width of 50 s.
It can be widely used as a power source for evaluation and characteristic tests in R&D fields of such as semi-
conductors and other electronic compoments.
The 6240B characteristics are described below.
• Source and measurement: Up to 15 V, 1 A (DC)
Up to 15 V, 4 A (pulse)
(Pulse: maximum pulse width of 20 ms, duty factor 20%)
• Voltage range: 300 mV to 15 V
• Current range: 30 A to 1 A (DC) or 4 A (pulse)
• Display digits: Source: 4
1
/
2
Measurement: 5
1
/
2
• Voltage resolution Source: 10 V Measurement: 1 V
• Current resolution Source: 1 nA Measurement: 100 pA
• Voltage source current measurement (VSIM)/Current source voltage measurement (ISVM)
• Voltage source voltage measurement (VSVM)/Current source current measurement (ISIM)
• Sink-enabled bipolar output
• Minimum pulse width: 50 s
• Linear, 2-slope linear, fixed and random sweep functions for characteristic test
• Detection functions such as limiter (compliance), overload, and overheat
• Synchronized operation function by combining two or more 6240B
• GPIB and USB for integrating an automated measurement system
• Low-resistance measurement pulse generation function
To Next Page
Loading...
Need help?
General
