6240B DC Voltage Current Source/Monitor Operation Manual
1.10 Product Disposal and Recycling
1-15
1.10 Product Disposal and Recycling
Correctly dispose of the 6240B in accordance with local and national regulations.
Before disposal, remove the following parts from the product to prevent dispersal of substances that may
adversely affect the environment, human health, or the ecosystem.
NOTE: For assistance with locating a waste disposal company, contact an ADC CORPORATION sales represen-
tative.
Name of substance or removed part Used?
Location
Unit Part
Capacitor containing polychlorinated biphe-
nyls (PCBs)
No -
Part containing mercury No -
Battery No -
Printed circuit boards Yes Unit Main Printed circuit boards
Toner cartridge No -
Plastic containing brominated flame retar-
dants
Yes Unit BPL-034287X04
BPF-034288
BPF-012009
BPB-034291
Connectors, diodes,
Zener diodes,
photocouplers, FET,
analog ICs, logic ICs,
FLASH memories,
transistors
Parts containing asbestos No -
Cathode-ray tubes No -
Chloroflourocarbon (CFC),
hydrochlorofluorocarbon (HCFC),
hydrofluorocarbon (HFC), or
hydrocarbon (HC)
No -
Electric-discharge indicator No -
LCD display of 100 cm
2
or larger No -
Connecting cable Yes Between
units
Power Cable
Input and output cable
Parts containing flame-resistant ceramic
fibers
No -
Parts containing radioactive material No -
Electrolytic capacitors containing substance
of concern
(With height > 25 mm, dia. > 25 mm, or
equivalent volume)
No -
Arsenic or its compounds Yes Unit Electronic com-
ponents
Photocouplers, logic ICs
To Next Page
Loading...
Need help?
General
