Chapter 1 1-9
Service Equipment and Analyzer Options
Analyzer Options Available
Option 075, 75 Ohm System Impedance (8753ES only)
This option offers 75Ω impedance bridges with type-N port connectors.
Option 1CM, Rack Mount Flange Kit without Handles
This option is a rack mount kit containing a pair of flanges and the necessary hardware to
mount the instrument, with handles detached, in an equipment rack with 482.6 mm
(19 inches) horizontal spacing.
Option 1CP, Rack Mount Flange Kit with Handles
This option is a rack mount kit containing a pair of flanges and the necessary hardware to
mount the instrument with handles attached in an equipment rack with 482.6 mm
(19 inches) spacing.
To Next Page
Loading...
Need help?
General
