Agilent Technologies 8753ET - If the Fault Is Intermittent

6-18 Chapter 6
Digital Control Troubleshooting
If the Fault Is Intermittent
If the Fault Is Intermittent
Repeat Test Function
If the failure is intermittent, do the following:
1. Press to turn on the
repeat function.
2. Then press .
3. Select the test desired and press .
4. Press any key to stop the function. The test repeat function is explained in Chapter 10 ,
“Service Key Menus and Error Messages.”
System
SERVICE MENU
TEST OPTIONS
REPEAT ON
RETURN
TESTS
EXECUTE TEST