Agilent Technologies E4406A VSA Series - Page 242

242 Chapter5
Language Reference
MEASure Group of Commands
Total power
reference
7
Basic,
cdmaOne,
cdma2000,
W-CDMA
(3GPP), or
W-CDMA
(Trial &
Arib) mode
Returns 12 comma-separated scalar values of the pass/fail
(0=passed, or 1=failed) results determined by testing the
absolute power limit of the center and offset frequencies
(measured as total power in dB):
1. Upper adjacent chan center frequency
2. Lower adjacent chan center frequency
3. Negative offset frequency (1)
4. Positive offset frequency (1)
...
11.Negative offset frequency (5)
12.Positive offset frequency (5)
Power spectral
density
reference
7
Basic,
cdmaOne,
cdma2000,
W-CDMA
(3GPP), or
W-CDMA
(Trial &
Arib) mode
Returns 12 comma-separated scalar values of the pass/fail
(0=passed, or 1=failed) results determined by testing the
absolute power limit of the center and offset frequencies
(measured as power spectral density in dB):
1. Upper adjacent chan center frequency
2. Lower adjacent chan center frequency
3. Negative offset frequency (1)
4. Positive offset frequency (1)
...
11.Negative offset frequency (5)
12.Positive offset frequency (5)
Total power
reference
8
Basic,
cdmaOne,
cdma2000,
W-CDMA
(3GPP), or
W-CDMA
(Trial &
Arib) mode
Returns 12 comma-separated scalar values of the pass/fail
(0=passed, or 1=failed) results determined by testing the power
limit relative to the center frequency (measured as total power
spectral in dB):
1. Upper adjacent chan center frequency
2. Lower adjacent chan center frequency
3. Negative offset frequency (1)
4. Positive offset frequency (1)
...
11.Negative offset frequency (5)
12.Positive offset frequency (5)
Measurement
Type
n Results Returned