Chapter 5 241
Language Reference
MEASure Group of Commands
6
iDEN
mode
Returns 4 comma-separated pass/fail test results for the
absolute power of the reference and offset channels:
1. Reference channel absolute power pass/fail
2. Reference channel absolute power pass/fail (duplicate of
above)
3. Lower offset channel absolute power pass/fail
4. Upper offset channel absolute power pass/fail
Total power
reference
6
Basic,
cdmaOne,
cdma2000,
W-CDMA
(3GPP), or
W-CDMA
(Trial &
Arib) mode
Returns 12 comma-separated scalar values (total power in dB)
of the power relative to the carrier at the center and the offset
frequencies:
1. Upper adjacent chan center frequency
2. Lower adjacent chan center frequency
3. Negative offset frequency (1)
4. Positive offset frequency (1)
5. Negative offset frequency (5)
...
11.Negative offset frequency (5)
12.Positive offset frequency (5)
Power spectral
density
reference
6
Basic,
cdmaOne,
cdma2000,
W-CDMA
(3GPP), or
W-CDMA
(Trial &
Arib) mode
Returns 12 comma-separated scalar values (power spectral
density in dB) of the power relative to the carrier at the center
and offset frequencies:
1. Upper adjacent chan center frequency
2. Lower adjacent chan center frequency
3. Negative offset frequency (1)
4. Positive offset frequency (1)
...
11.Negative offset frequency (5)
12.Positive offset frequency (5)
7
iDEN
mode
Returns 4 comma-separated pass/fail test results for the
relative power of the reference and offset channels:
1. Reference channel relative power pass/fail
2. Reference channel relative power pass/fail (duplicate of
above)
3. Lower offset channel relative power pass/fail
4. Upper offset channel relative power pass/fail
Measurement
Type
n Results Returned
To Next Page
Loading...
Need help?
General
