Chapter 6 411
Error Messages
Error Message Descriptions
W-CDMA - Specific Error Messages
[500 to 599]
An error number in the range [500 to 599] indicates the instrument has
detected an error relating to the W-CDMA personality.
W-CDMA - Specific Error Message Descriptions
(Number) Description
(501) Signal too noisy
(502) Input power too low
(503) Cannot correlate to input signal
Cannot correlate to the input signal and no active
channel is found. (from composite EVM measurement)
cdma2000 - Specific Error Messages
[600 to 699]
An error number in the range [600 to 699] indicates the instrument has
detected an error relating to the cdma2000 personality.
cdma2000 - Specific Error Message Descriptions
(Number) Description
(601) Signal too noisy
(602) Input power too low
(603) Can not get long code phase (RS-232)
For MS (mobile station) measurements, the long code
phase information could not be obtained from the signal
at the RS-232 port.(from code domain power
measurement or composite EVM measurement)
(604) Cannot correlate to input signal
Cannot correlate to the input signal and no active
channel is found. (from composite EVM measurement)
To Next Page
Loading...
Need help?
General
