Colors and Palettes
153
PDesign4 Touch Panel Design Software (v2.10 or higher)
• Properties table This table indicates the Properties of the button, page or popup page
selected with the Grab Properties tool or obtained through the use of the
Grab Selected button within the dialog.
The list is separated into three parts: General, Programming, and States.
Scroll down to view the entire list. Click the checkboxes to select which of
the Properties in this set to Paint (via the Paint Selected command button)
or to Grab (via the Grab Selected command button). The checkbox in the
General heading selects all General properties, the checkbox in the Pro-
gramming heading selects all programming properties, and the checkbox in
the States headings selects all state properties for the indicated state.
• Paint Selected Select one or more buttons in the Design View, and select the Paint
Selected command button to paint those properties onto the selected but-
ton(s).
Alternatively, once a Property Set has been acquired (either via the Grab
Properties tool, obtained through the use of the Grab Selected button within
the dialog, or by opening a saved Properties Set), you can close this dialog
and select the Paint Properties Tool from the toolbar. Each button or page
you click on will be painted with the indicated Properties Set.
• Grab Selected Select a single button, page or popup page, and select Grab Selected to
populate the Properties table with the selected item's property set.
To Next Page
Loading...
