102
Telephone mode
End call
Select
Hang up in the Options menu to
end the active call. See “Ending a call”
on page 101.
DTMF
So-called DTMF dialling tones can be
transmitted. For example, these tones
are required to retrieve information from
an answering machine.
! Open the Options menu.
! Select the DTMF entry.
! Enter the required sequence of
numbers by turning and pressing the
rotary control/push button .
The entries must not be confirmed. The
individual DTMF tones will be sent
immediately after selection.
! Press to exit the input menu.
or
! In the input menu, select the
symbol.
Private
You can divert calls received via
Cascade to the mobile phone. The
hands-free unit is then deactivated.
! Open the Options menu.
! Select the Private entry.
! Press the rotary control/push button
to switch the function on ( ) or
off ( ).
5028
5021
Notes:
• With some mobile phones, the
connection from the mobile phone to
the Cascade will be interrupted when
this function is activated. If this is the
case you will have to reconnect the
mobile phone to the Cascade as
described in “Connecting and
disconnecting devices” on page 123.
• If, at the end of the call, the function
Private was activated, it will be
deactivated again for the next call.
To Next Page
Loading...
Need help?
General
