Becker Cascade - Entering Destination Via Geo-Coordinates; Selecting Junction for Destination Road

32
Navigation mode
A list containing ranges of house num-
bers appears.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required range.
You can now start route guidance by
selecting
Start route guidance.
Selecting junction for
destination road
! In the Enter Destination menu, select
Intersection.
! Confirm your selection by pressing
the rotary control/push button .
A list of junctions appears.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required junction.
Entering destination
via geo-coordinates
You can also enter a destination as geo-
coordinates.
! In the Enter Destination menu, select
Geo co-ordinates.
! Confirm your selection by pressing
the rotary control/ push button .
The input menu for the geo-coordinates
will appear.
! Turn the rotary control/push button
and then press the rotary control/
push button to select the digits of the
coordinates one after the other.
Note:
A junction can only be selected if this
information is stored in the navigation
data.
2022
Note:
If the destination road entered crosses
more than 9 roads, a data entry menu
corresponding to the data entry menu
for roads appears.
2023
2024
2097
2098