42
Navigation mode
In place
! In the POI menu, select the In pčace
entry.
! Confirm your selection by pressing
the rotary control/push button .
! Select the desired country as described
under “Selecting a country” on
page 27.
! Select the required town as described
under “Entering a destination town”
on page 28.
or
! Select the required postcode as
described under “Selecting destina-
tion via postcode” on page 29.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI cate-
gory.
The data entry menu for POIs appears
or, if fewer than 10 POIs are available in
the selected category, the unit switches
directly to the POI list.
! Turn the rotary control/push button
and then press the rotary control/push
button to select each letter one after the
other.
Accept entry:
! In the data entry menu, select the
symbol.
or
! Press the rotary control/push button
and hold it down for at least 2 seconds.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI.
Route guidance to the selected point of
interest is initiated.
2050
2051
2052
2053
2054
To Next Page
Loading...
