Becker Cascade User Manual

134
Settings
• You can use Cčock to configure the
GMT time sent by the satellite in
terms of its format and the current
time zone.
The time only needs to be set so that
the Cascade can supply navigation
information correctly on routes with
time-dependent route guidance. Set-
ting the time also ensures that antici-
pated times of arrival are announced/
displayed correctly.
Calling up the system settings
! Press .
! Turn the rotary control/push button
counter clockwise until
System
setting
appears at the top right of the
display.
! Press the rotary control/push button
.
! Turn the rotary control/push button
to select one of the following options:
Audio,
Externač device,
Dispčay,
Reset functions,
Data backup,
Direction of rotary actuator or
Cčock
! Confirm your selection by pressing
the rotary control/push button .
Audio
The Audio section includes system
settings for audio mode.
GAL (speed dependent volume)
GAL is a control circuit on the Cascade.
This control circuit automatically
increases the volume of the Cascade
depending on the speed of the vehicle.
You can define the extent to which the
volume should be increased depending
on the speed of the vehicle here.
! Select Audio in the system settings.
! Select Speed-dependent vočume.
! Turn the rotary control/push button
to select the required value.
7014
7015
7016

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN