Becker Cascade User Manual

129
Settings
Voice mode
You can make settings for voice mode as
well as for traffic announcements and
other announcements here.
Calling up voice mode settings
! Press .
! Turn the rotary control/push button
counter clockwise until
Voice operation
appears at the top right of the display.
This display provides information about
the number of free voice entries still
available for address book entries and
radio stations. In the example, 30 are
available for address book entries and 20
for radio stations.
! Press the rotary control/push button
.
! Turn the rotary control/push button
to select one of the following options:
Set system čanguage,
Show settings,
Vočume of voice output,
Automatic diačogues,
Voice entries,
Voice output,
PTT extended or
Repeat voice announcement
! Confirm your selection by pressing
the rotary control/push button .
Setting the system language
You can select the language for
announcements and displays here.
! Select Set system čanguage in the voice
mode settings.
7002
7003
Notes:
• The memory card containing the nav-
igation data or system CD must be
inserted in order to change the lan-
guage or speaker. If necessary, the
Cascade will prompt you to insert the
memory card/system CD.
• It may take up to 10 minutes to install
the language.
• When the system language changes,
voice entries created for stations and
addresses are deleted.
7004

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN